Thank you!
We’ll contact you shortly
DescriptionDetails & specsAttachments
SHARAN-200S8 is an 8S4P 20,000 mAh Li-Ion battery pack for FPV drones, built with high-drain Samsung 50S cells. The pack has a nominal voltage of 28.8 V and is designed to operate in high-load FPV systems.
The battery is intended for FPV drones and unmanned systems designed to be powered by an 8-cell (8S) Li-Ion assembly. The 20,000 mAh capacity provides maximum autonomy and energy reserve, while the 8S4P configuration yields high voltage and double current output for the most powerful and heavy platforms.
This model is available exclusively in a vertical configuration. This shape allows for convenient installation in drone frame builds with limited horizontal space.
High-Drain Samsung 50S Cells
The battery pack relies on Samsung 50S Li-Ion cells. The 8S4P configuration consists of eight series-connected groups, each containing four cells connected in parallel.
This setup combines a nominal voltage of 28.8 V, an impressive capacity of 20,000 mAh, and continuous ultra-high discharge performance. The pack is well-suited for FPV drones and UAV systems requiring a high-capacity 8S Li-Ion power source for long-range flights.
Main Battery Specifications
Dimensions
Vertical Configuration — 165х85х70 mm
Battery Construction
A heavy-duty 8 AWG silicone power wire is used for high-current throughput, terminated with an XT90 connector.
The silicone balance lead is resistant to thermal exposure and pinching.
The battery assembly is wrapped in dual-layer heat shrink tubing. This provides extra cell security and protects the construction during transport, mounting, and heavy use.
Vertical Battery Configuration
The SHARAN-200S8 comes in a vertical configuration. This layout makes it easy to fit inside drone frames where vertical cell alignment is essential and horizontal clearance is restricted.
How to Check Compatibility with Your FPV Drone
The SHARAN-200S8 battery pack is compatible with 8S-ready FPV drones and UAV platforms. Its vertical design, high 20,000 mAh capacity, and 8 AWG wiring with an XT90 plug make it an ideal choice for high-payload FPV systems.
The battery is intended for FPV drones and unmanned systems designed to be powered by an 8-cell (8S) Li-Ion assembly. The 20,000 mAh capacity provides maximum autonomy and energy reserve, while the 8S4P configuration yields high voltage and double current output for the most powerful and heavy platforms.
This model is available exclusively in a vertical configuration. This shape allows for convenient installation in drone frame builds with limited horizontal space.
High-Drain Samsung 50S Cells
The battery pack relies on Samsung 50S Li-Ion cells. The 8S4P configuration consists of eight series-connected groups, each containing four cells connected in parallel.
This setup combines a nominal voltage of 28.8 V, an impressive capacity of 20,000 mAh, and continuous ultra-high discharge performance. The pack is well-suited for FPV drones and UAV systems requiring a high-capacity 8S Li-Ion power source for long-range flights.
Main Battery Specifications
- Battery Type — Li-Ion
- Configuration — 8S4P
- Assembly Shape — Vertical
- Cells — Samsung 50S
- Capacity — 20,000 mAh
- Nominal Voltage — 28.8 V
- Maximum Voltage — 33.6 V
- Minimum Voltage — 20.0 V
- Maximum Discharge Current — up to 180 A
- Main Connector — XT90
- Power Cable — 8 AWG
- Weight — 2410 g
Dimensions
Vertical Configuration — 165х85х70 mm
Battery Construction
A heavy-duty 8 AWG silicone power wire is used for high-current throughput, terminated with an XT90 connector.
The silicone balance lead is resistant to thermal exposure and pinching.
The battery assembly is wrapped in dual-layer heat shrink tubing. This provides extra cell security and protects the construction during transport, mounting, and heavy use.
Vertical Battery Configuration
The SHARAN-200S8 comes in a vertical configuration. This layout makes it easy to fit inside drone frames where vertical cell alignment is essential and horizontal clearance is restricted.
How to Check Compatibility with Your FPV Drone
- Before purchasing, make sure to check:
- operating voltage of the drone or flight controller
- available mounting space
- payload limits for dimensions and weight
- required discharge current
- XT90 connector compatibility
- battery mounting method on your frame setup
The SHARAN-200S8 battery pack is compatible with 8S-ready FPV drones and UAV platforms. Its vertical design, high 20,000 mAh capacity, and 8 AWG wiring with an XT90 plug make it an ideal choice for high-payload FPV systems.
Brand
SHARAN
Model
SHARAN-200S8
Application
For FPV drones
Battery type
Li-Ion
Pack shape
Vertical
Configuration
8S4P
Battery cells
Samsung 50S
Capacity
20 000 mAh
Nominal voltage
28.8 V
Maximum voltage
33.6 V
Minimum voltage
20.0 V
Rated discharge current
105 A
Maximum discharge current
180 A
Power connector
XT90
Power cable
8 AWG
Weight
2410 г g
Country of manufacture
Ukraine
Warranty
12 months
In stock
SHARAN-200S8 8S4P, Battery for FPV drones, Samsung 50S, 20 000 mAh (SHARAN-200S8)
BESTSELLER
0,00 ₴7 250,00 ₴
Форма збірки
Ємність
Силовий роз’єм
Виробник
DescriptionDetails & specsAttachments
SHARAN-200S8 is an 8S4P 20,000 mAh Li-Ion battery pack for FPV drones, built with high-drain Samsung 50S cells. The pack has a nominal voltage of 28.8 V and is designed to operate in high-load FPV systems.
The battery is intended for FPV drones and unmanned systems designed to be powered by an 8-cell (8S) Li-Ion assembly. The 20,000 mAh capacity provides maximum autonomy and energy reserve, while the 8S4P configuration yields high voltage and double current output for the most powerful and heavy platforms.
This model is available exclusively in a vertical configuration. This shape allows for convenient installation in drone frame builds with limited horizontal space.
High-Drain Samsung 50S Cells
The battery pack relies on Samsung 50S Li-Ion cells. The 8S4P configuration consists of eight series-connected groups, each containing four cells connected in parallel.
This setup combines a nominal voltage of 28.8 V, an impressive capacity of 20,000 mAh, and continuous ultra-high discharge performance. The pack is well-suited for FPV drones and UAV systems requiring a high-capacity 8S Li-Ion power source for long-range flights.
Main Battery Specifications
Dimensions
Vertical Configuration — 165х85х70 mm
Battery Construction
A heavy-duty 8 AWG silicone power wire is used for high-current throughput, terminated with an XT90 connector.
The silicone balance lead is resistant to thermal exposure and pinching.
The battery assembly is wrapped in dual-layer heat shrink tubing. This provides extra cell security and protects the construction during transport, mounting, and heavy use.
Vertical Battery Configuration
The SHARAN-200S8 comes in a vertical configuration. This layout makes it easy to fit inside drone frames where vertical cell alignment is essential and horizontal clearance is restricted.
How to Check Compatibility with Your FPV Drone
The SHARAN-200S8 battery pack is compatible with 8S-ready FPV drones and UAV platforms. Its vertical design, high 20,000 mAh capacity, and 8 AWG wiring with an XT90 plug make it an ideal choice for high-payload FPV systems.
The battery is intended for FPV drones and unmanned systems designed to be powered by an 8-cell (8S) Li-Ion assembly. The 20,000 mAh capacity provides maximum autonomy and energy reserve, while the 8S4P configuration yields high voltage and double current output for the most powerful and heavy platforms.
This model is available exclusively in a vertical configuration. This shape allows for convenient installation in drone frame builds with limited horizontal space.
High-Drain Samsung 50S Cells
The battery pack relies on Samsung 50S Li-Ion cells. The 8S4P configuration consists of eight series-connected groups, each containing four cells connected in parallel.
This setup combines a nominal voltage of 28.8 V, an impressive capacity of 20,000 mAh, and continuous ultra-high discharge performance. The pack is well-suited for FPV drones and UAV systems requiring a high-capacity 8S Li-Ion power source for long-range flights.
Main Battery Specifications
- Battery Type — Li-Ion
- Configuration — 8S4P
- Assembly Shape — Vertical
- Cells — Samsung 50S
- Capacity — 20,000 mAh
- Nominal Voltage — 28.8 V
- Maximum Voltage — 33.6 V
- Minimum Voltage — 20.0 V
- Maximum Discharge Current — up to 180 A
- Main Connector — XT90
- Power Cable — 8 AWG
- Weight — 2410 g
Dimensions
Vertical Configuration — 165х85х70 mm
Battery Construction
A heavy-duty 8 AWG silicone power wire is used for high-current throughput, terminated with an XT90 connector.
The silicone balance lead is resistant to thermal exposure and pinching.
The battery assembly is wrapped in dual-layer heat shrink tubing. This provides extra cell security and protects the construction during transport, mounting, and heavy use.
Vertical Battery Configuration
The SHARAN-200S8 comes in a vertical configuration. This layout makes it easy to fit inside drone frames where vertical cell alignment is essential and horizontal clearance is restricted.
How to Check Compatibility with Your FPV Drone
- Before purchasing, make sure to check:
- operating voltage of the drone or flight controller
- available mounting space
- payload limits for dimensions and weight
- required discharge current
- XT90 connector compatibility
- battery mounting method on your frame setup
The SHARAN-200S8 battery pack is compatible with 8S-ready FPV drones and UAV platforms. Its vertical design, high 20,000 mAh capacity, and 8 AWG wiring with an XT90 plug make it an ideal choice for high-payload FPV systems.
Brand
SHARAN
Model
SHARAN-200S8
Application
For FPV drones
Battery type
Li-Ion
Pack shape
Vertical
Configuration
8S4P
Battery cells
Samsung 50S
Capacity
20 000 mAh
Nominal voltage
28.8 V
Maximum voltage
33.6 V
Minimum voltage
20.0 V
Rated discharge current
105 A
Maximum discharge current
180 A
Power connector
XT90
Power cable
8 AWG
Weight
2410 г g
Country of manufacture
Ukraine
Warranty
12 months
DELIVERY
NOVA POST DELIVERYDelivery to a Nova Poshta branch or parcel locker across Ukraine. The cost and delivery time are calculated according to the carrier’s rates.
DOOR-TO-DOOR DELIVERY ACROSS UKRAINECourier delivery to the specified address after the order details, dimensions and delivery timeframe have been confirmed.
DOOR-TO-DOOR DELIVERY IN LVIVDelivery within Lviv by prior arrangement with a manager. A convenient option for urgent or oversized orders.
PICKUP IN LVIVYou can collect your order after a manager confirms that it is ready.
PAYMENT
ONLINE CARD PAYMENTQuickly pay for your order by bank card while placing it on the website.
PAYMENT ON DELIVERYPay for the order after receiving and inspecting the product at the carrier’s location.
PAYMENT VIA PAYPALAvailable for selected orders after confirmation with a manager. Payment details are provided individually.
BANK TRANSFER FOR SOLE PROPRIETORS/COMPANIESAfter the order is confirmed, we issue an invoice for payment by a sole proprietor or company.
Haven’t found the right battery pack?
Submit a request — we will select or manufacture a battery pack to your specifications for FPV and DJI drones, UGVs and other unmanned systems.
Can't send form
Please try again later.
CATALOGUE
NAVIGATION
CONTACTS
MON–SUN 8:00 AM–9:00 PM
CATALOGUE
NAVIGATION
CONTACTS
MON–SUN 8:00 AM–9:00 PM