Thank you!
We’ll contact you shortly
DescriptionDetails & specsAttachments
SHARAN-100S is a 6S2P lithium-ion battery pack with a capacity of 10,000 mAh, designed for FPV drones and built using high-discharge Samsung 50S cells. The pack has a nominal voltage of 22.2 V, a rated discharge current of up to 70 A and a maximum discharge current of up to 90 A.
The battery is designed for FPV drones and unmanned systems powered by a 6S Li-Ion battery pack. Its 10,000 mAh capacity provides a sufficient energy reserve for extended operation, while the high current output makes it suitable for systems operating under significant loads.
High-discharge Samsung 50S cells
The battery is built using Samsung 50S lithium-ion cells. The 6S2P configuration consists of six groups connected in series, with two cells connected in parallel within each group.
This configuration combines a nominal voltage of 22.2 V with a capacity of 10,000 mAh and is suitable for FPV drones that require a battery pack with high current output.
Main battery specifications
Battery type — Li-IonConfiguration — 6S2PPack shape — horizontal or verticalBattery cells — Samsung 50SCapacity — 10,000 mAhNominal voltage — 22.2 VMaximum voltage — 25.2 VMinimum voltage — 15.0 VRated discharge current — 70 AMaximum discharge current — 90 AWeight — 920 g
Dimensions of the available versions
Horizontal version — 146 × 47 × 66 mmVertical version — 130 × 42 × 70 mm
Battery construction
The battery uses a thick 10 AWG silicone power cable designed to handle high currents. The silicone balance cable is resistant to high temperatures and pinching.
The battery pack is enclosed in two layers of heat-shrink film. These layers provide additional cell fixation and protect the pack during transportation, installation and operation.
How to choose the battery shape
The horizontal and vertical versions have the same main electrical specifications but differ in cell arrangement and dimensions.
How to check compatibility with an FPV drone
Before purchasing the battery, check:
The SHARAN-100S battery is suitable for FPV drones and unmanned systems compatible with 6S battery packs. When in doubt, check the specifications of your drone or flight controller before placing an order.
The battery is designed for FPV drones and unmanned systems powered by a 6S Li-Ion battery pack. Its 10,000 mAh capacity provides a sufficient energy reserve for extended operation, while the high current output makes it suitable for systems operating under significant loads.
High-discharge Samsung 50S cells
The battery is built using Samsung 50S lithium-ion cells. The 6S2P configuration consists of six groups connected in series, with two cells connected in parallel within each group.
This configuration combines a nominal voltage of 22.2 V with a capacity of 10,000 mAh and is suitable for FPV drones that require a battery pack with high current output.
Main battery specifications
Battery type — Li-IonConfiguration — 6S2PPack shape — horizontal or verticalBattery cells — Samsung 50SCapacity — 10,000 mAhNominal voltage — 22.2 VMaximum voltage — 25.2 VMinimum voltage — 15.0 VRated discharge current — 70 AMaximum discharge current — 90 AWeight — 920 g
Dimensions of the available versions
Horizontal version — 146 × 47 × 66 mmVertical version — 130 × 42 × 70 mm
Battery construction
The battery uses a thick 10 AWG silicone power cable designed to handle high currents. The silicone balance cable is resistant to high temperatures and pinching.
The battery pack is enclosed in two layers of heat-shrink film. These layers provide additional cell fixation and protect the pack during transportation, installation and operation.
How to choose the battery shape
The horizontal and vertical versions have the same main electrical specifications but differ in cell arrangement and dimensions.
How to check compatibility with an FPV drone
Before purchasing the battery, check:
- the operating voltage of the drone or flight controller;
- the available dimensions of the battery compartment;
- the maximum permitted battery weight;
- the required discharge current;
- the power and balance connector types;
- the battery mounting method used on the drone.
The SHARAN-100S battery is suitable for FPV drones and unmanned systems compatible with 6S battery packs. When in doubt, check the specifications of your drone or flight controller before placing an order.
Brand
SHARAN
Model
SHARAN-100S
Application
For FPV drones
Battery type
Li-Ion
Pack shape
Vertical
Configuration
6S2P
Battery cells
Samsung 50S
Capacity
10 000 mAh
Nominal voltage
22.2 V
Maximum voltage
25.2 V
Minimum voltage
15.0 V
Rated discharge current
70 A
Maximum discharge current
90 A
Power connector
XT60
Power cable
10 AWG
Weight
920 g
Country of manufacture
Ukraine
Warranty
12 months
In stock
SHARAN-100S 6S2P Battery for FPV Drones, Samsung 50S, 10,000 mAh (SHARAN-100S v)
NEW
0,00 ₴2 500,00 ₴
Форма збірки
Ємність
Силовий роз’єм
Виробник
DescriptionDetails & specsAttachments
SHARAN-100S is a 6S2P lithium-ion battery pack with a capacity of 10,000 mAh, designed for FPV drones and built using high-discharge Samsung 50S cells. The pack has a nominal voltage of 22.2 V, a rated discharge current of up to 70 A and a maximum discharge current of up to 90 A.
The battery is designed for FPV drones and unmanned systems powered by a 6S Li-Ion battery pack. Its 10,000 mAh capacity provides a sufficient energy reserve for extended operation, while the high current output makes it suitable for systems operating under significant loads.
High-discharge Samsung 50S cells
The battery is built using Samsung 50S lithium-ion cells. The 6S2P configuration consists of six groups connected in series, with two cells connected in parallel within each group.
This configuration combines a nominal voltage of 22.2 V with a capacity of 10,000 mAh and is suitable for FPV drones that require a battery pack with high current output.
Main battery specifications
Battery type — Li-IonConfiguration — 6S2PPack shape — horizontal or verticalBattery cells — Samsung 50SCapacity — 10,000 mAhNominal voltage — 22.2 VMaximum voltage — 25.2 VMinimum voltage — 15.0 VRated discharge current — 70 AMaximum discharge current — 90 AWeight — 920 g
Dimensions of the available versions
Horizontal version — 146 × 47 × 66 mmVertical version — 130 × 42 × 70 mm
Battery construction
The battery uses a thick 10 AWG silicone power cable designed to handle high currents. The silicone balance cable is resistant to high temperatures and pinching.
The battery pack is enclosed in two layers of heat-shrink film. These layers provide additional cell fixation and protect the pack during transportation, installation and operation.
How to choose the battery shape
The horizontal and vertical versions have the same main electrical specifications but differ in cell arrangement and dimensions.
How to check compatibility with an FPV drone
Before purchasing the battery, check:
The SHARAN-100S battery is suitable for FPV drones and unmanned systems compatible with 6S battery packs. When in doubt, check the specifications of your drone or flight controller before placing an order.
The battery is designed for FPV drones and unmanned systems powered by a 6S Li-Ion battery pack. Its 10,000 mAh capacity provides a sufficient energy reserve for extended operation, while the high current output makes it suitable for systems operating under significant loads.
High-discharge Samsung 50S cells
The battery is built using Samsung 50S lithium-ion cells. The 6S2P configuration consists of six groups connected in series, with two cells connected in parallel within each group.
This configuration combines a nominal voltage of 22.2 V with a capacity of 10,000 mAh and is suitable for FPV drones that require a battery pack with high current output.
Main battery specifications
Battery type — Li-IonConfiguration — 6S2PPack shape — horizontal or verticalBattery cells — Samsung 50SCapacity — 10,000 mAhNominal voltage — 22.2 VMaximum voltage — 25.2 VMinimum voltage — 15.0 VRated discharge current — 70 AMaximum discharge current — 90 AWeight — 920 g
Dimensions of the available versions
Horizontal version — 146 × 47 × 66 mmVertical version — 130 × 42 × 70 mm
Battery construction
The battery uses a thick 10 AWG silicone power cable designed to handle high currents. The silicone balance cable is resistant to high temperatures and pinching.
The battery pack is enclosed in two layers of heat-shrink film. These layers provide additional cell fixation and protect the pack during transportation, installation and operation.
How to choose the battery shape
The horizontal and vertical versions have the same main electrical specifications but differ in cell arrangement and dimensions.
How to check compatibility with an FPV drone
Before purchasing the battery, check:
- the operating voltage of the drone or flight controller;
- the available dimensions of the battery compartment;
- the maximum permitted battery weight;
- the required discharge current;
- the power and balance connector types;
- the battery mounting method used on the drone.
The SHARAN-100S battery is suitable for FPV drones and unmanned systems compatible with 6S battery packs. When in doubt, check the specifications of your drone or flight controller before placing an order.
Brand
SHARAN
Model
SHARAN-100S
Application
For FPV drones
Battery type
Li-Ion
Pack shape
Vertical
Configuration
6S2P
Battery cells
Samsung 50S
Capacity
10 000 mAh
Nominal voltage
22.2 V
Maximum voltage
25.2 V
Minimum voltage
15.0 V
Rated discharge current
70 A
Maximum discharge current
90 A
Power connector
XT60
Power cable
10 AWG
Weight
920 g
Country of manufacture
Ukraine
Warranty
12 months
DELIVERY
NOVA POST DELIVERYDelivery to a Nova Poshta branch or parcel locker across Ukraine. The cost and delivery time are calculated according to the carrier’s rates.
DOOR-TO-DOOR DELIVERY ACROSS UKRAINECourier delivery to the specified address after the order details, dimensions and delivery timeframe have been confirmed.
DOOR-TO-DOOR DELIVERY IN LVIVDelivery within Lviv by prior arrangement with a manager. A convenient option for urgent or oversized orders.
PICKUP IN LVIVYou can collect your order after a manager confirms that it is ready.
PAYMENT
ONLINE CARD PAYMENTQuickly pay for your order by bank card while placing it on the website.
PAYMENT ON DELIVERYPay for the order after receiving and inspecting the product at the carrier’s location.
PAYMENT VIA PAYPALAvailable for selected orders after confirmation with a manager. Payment details are provided individually.
BANK TRANSFER FOR SOLE PROPRIETORS/COMPANIESAfter the order is confirmed, we issue an invoice for payment by a sole proprietor or company.
Haven’t found the right battery pack?
Submit a request — we will select or manufacture a battery pack to your specifications for FPV and DJI drones, UGVs and other unmanned systems.
Can't send form
Please try again later.
CATALOGUE
NAVIGATION
CONTACTS
MON–SUN 8:00 AM–9:00 PM
CATALOGUE
NAVIGATION
CONTACTS
MON–SUN 8:00 AM–9:00 PM